国产卡一卡二卡三卡四卡免费,纯爱无遮挡h肉动漫在线播放,国产成人久久久精品二区三区,久久国产香蕉一区精品蜜桃

CNC lathe manufacturers on the use of attention to what matters
CNC lathe is mainly used for processing of large diameter and short length of large and heavy components and artifacts in the clip is arranged on the horizontal lathe, meet the turning diameter, heavy workpieces in the sleeper is not easy to clip, due to its own weight, on machining accuracy influential, the vertical lathe can be to solve the above problems. What problems should be paid attention to in the use of CNC lathes?
1, the surface of the work piece is not directly placed on the work table, the application of iron or spiral top support; no use of the work table for other operations such as the hammer to correct the workpiece, welding workpiece and so on.
2, when looking for a positive workpiece can only point to the low speed rotation of the work table to find the right, not to speed to find the right.
3, stop working table, table open to stop only pulled by hand, prohibit the use of pedal.
4, the working table rotation is not allowed to do the beam movements and rapid movement of the tool carrier.
5, when the moving beam must first loosen the clamping device, moving the end should be immediately clamped. After each fall, the beam should be increased a little, to eliminate the screw, nut gap.
6, do not allow vertical straight knife frame and side turret ram out long under gravity cutting; using vertical cutter for processing, especially gravity cutting should be pillars as far as possible down to close to the working position.
7, intermittent cutting, should reduce speed and feed table.
8, variable speed control lever must be pushed to the specified position. If the gear is not engaged, should be adjusted after the work is not fretting, forced the workers to "stop" handle.
More attention to the contents of the CNC lathe used to pay attention to what matters, Tai'an, the number of Machinery Manufacturing Co., Ltd. Main CNC lathes, turning centers, processing centers and other new and old customers are welcome to come to order.